液压支架

一、产品简介（Product Introduction）

本款前维护液压支架专为一体机打造，突破传统后置支架检修繁琐、需预留背部空间的性能局限。整机采用高硬度冷轧钣金，表面黑色砂粒喷涂，耐盐雾腐蚀，结构坚固耐用。搭载液压链条移动杆与精密轴承，支持上下、左右、前后三维调节，屏体拼接偏移量控制在 0.5mm 以内，画面平整无错位。设备可独立弹出、推入屏体，全程正面完成布线、检修，无需预留后部维修通道，大幅节省安装空间。液压驱动推拉顺滑稳定，承重均衡不易沉降，适配各类商用大屏、展厅、安防拼接屏，兼顾安装美观、运维便捷与长期稳定使用，是一体化大屏工程优选支撑设备。

This front-maintenance hydraulic support is specially designed for all-in-one displays, breaking the performance limitations of conventional rear-mounted supports that feature cumbersome maintenance and require reserved rear clearance. The whole unit is constructed from high-hardness cold-rolled sheet metal with a black grain spray coating on the surface, offering salt spray corrosion resistance and robust, long-lasting structure. Equipped with hydraulic chain moving rods and precision bearings, it supports three-dimensional adjustment in vertical, horizontal and front-back directions. The positional offset between adjacent panels is controlled within 0.5 mm for seamless, aligned display surfaces. Panels can be independently ejected and retracted, allowing all wiring and maintenance operations to be carried out from the front without reserved rear service space, greatly saving installation room. Hydraulic drive ensures smooth and stable push-pull movement with balanced load bearing to prevent sagging. Compatible with commercial large screens, exhibition displays and security splicing screens, it delivers neat installation, easy maintenance and long-term stable operation, making it an ideal support solution for integrated large-screen projects.

二、规格摘要( Specification Abstract)